IM-Series: Digital Transmitter

รหัสสินค้า : IM-Series

DESCRIPTION

• Input device converter TC, RTD, mA, mVdc, Vdc input converters to 4-20 mA, 0-10 Vdc standard analog signals.

• DC Voltage Converters to standard analog signal 4-20 mA, 0-10 Vdc.

• AC Voltage Converters to standard analog signal 4-20 mA, 0-10 Vdc.

• AC Voltage Converters to standard analog signal 4-20 mA, 0-10 Ydc.

• Frequency converters, RPM to analog signals

• 2 standard analog outputs

- Current : 4-20 mA

- Voltage : 0-10 VDC

• Input and Output independent of each other (Isolation)

• Input and output can be set to High-Low Limit range via Push Button So Range can be set in the conversion signal as needed

• Can be programmed to select the output signal as Direct or Inverse

• 7-Segment digital display, 1 row, 4 digits, can display input and output signals

• Have function Peak hold for display maximum value

• Function Lock Key Prevents changing settings via the Button Switch

• DIN RAIL Mounting Installation

• 4 Alarm Functions

• Modbus RTU communication via RS-485 (via Output 2)

OPERATION

    IM-SERIES (Signal Transmitter) It is a device that converts electrical signals from temperature sensors (Thermocouple,RTD). mA, mVdc, or Vdc is a standard analog signal 4-20 mA, 0-10 Vdc, RS485 or Relay Alarm. The IM-A can output up to two outputs per Signal Input 

    IM-SERIES is a measurement system for input and output Isolate. Toprevent input/ output problems interfering with each other 

    The IM-SERIES has a ?-Segment 4-digit display for measuring input or display. Analog Outputs 4-20 mA, 0-10 Vdc makes it easy to analyze and monitor the input/ output of Sensor easily

    IM-SERIES can set Input Type, Input Scaling, Output Scaling. By setting the Parameter within the IM-SERIES with the key pad on it without the need to use Signal Simulator to simulate the signal to set the Scaling anymore. This is to reduce the use. And more convenient. 

You do not need a Signal Simulator or return the input/ output signal to the manufacturer, because the user can configure the desired value with the keypad 

    IM-SERIES can communicate with Modbus RTU by choosing to purchase Output 2 as RS-485, which is compatible with SCADA system

SPECIFICATION

DIMENSION

CIRCUIT DIAGRAM

ORDER CODE