PR-04-Series: Programmable Increment Encoder ø 50 mm.

รหัสสินค้า : PR-04-Series

DESCRIPTION

• It is a device that converts the axis of the encoder shaft into a pulse.

The electric pulse can be programmed in the same P/R. Easy to use

• The program can select the district pulse/ cycle from 1-4096 Pulses

• Push-Pull output is available for NPN, PNP Open Collector and Line-Driver

• Push-Pull output (A, B, Z) and Line-Driver (A, A, B, B, Z, Z)

• Power supply B-27 VDC (Push-pull) and 5 VDC (Line Driver)

OPERATION

PR-04-SERIES is Programmable Increment Encoder that can program

Pulse/ cycle range from 1-4096 Pulse/Cycle by connecting PR-PRO (Converter+

USB Cable+ Software) to PR-04-SERIES (Programmable Increment) Encoder)

and ComputerSet the pulse/cycle range through software before use

Connect the Programmable Increment Encoder PR-04-SERIES

to the motor shaft or work piece to be measured on the shaft. The PR-04-SERIES

rotates according to the motor sends a pulse signal according to the

pulse/ cycle of the model. For example, the PR-04-S-100 works by dividing

one round into 100 parts, while the moving shaft sends the pulse out of the

rotating parts. Signal B and A are 90 ํ electrical lead / lag . When clockwise

rotation, B will take page A, but if turn counterclockwise A will go to page B,

which will be useful to check the direction of rotation of the encoder. Signal

Z will have 1 pulse/cycle to indicate the anniversary. Program can provide

pulse lengths of 90 ํ, 180 ํ, 270 ํ and 360 ํ as desired.

SPECIFICATION

DIMENSION

CIRCUIT DIAGTAM

ORDER CODE